LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1993 >> APV >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 4T60-E >> Component Disassembly & Reassembly >> Input Clutch Assembly >> Disassembly

Input Clutch Assembly: Disassembly

  1. Remove input shaft thrust washer and input clutch backing plate snap ring. Remove input clutch backing plate. Remove input clutch steel and composition plates. Remove input clutch apply plate.
  2. Remove 3rd clutch backing plate snap ring and backing plate. Remove 3rd clutch steel and composition plates. See Figure. Remove 3rd clutch sprag retainer snap ring. Using Clutch Spring Compressor (J-23327) and Adapter (J-25018-A), compress and remove spring retainer.
  3. Remove 3rd clutch piston from housing. Remove 3rd clutch piston inner seal from shaft. Compress piston housing, and remove snap ring. Remove "O" ring. Remove spring and retainer assembly. Remove input clutch piston and inner seal.
scientia non olet · About LEMON Manuals