Removal Procedure
WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation (Front with DZW)Tire and Wheel Removal and Installation (Rear with DZW)Tire and Wheel Removal and Installation (SRW)
Front Wheelhouse Liner Bolt (1) - Remove [6x]
- Front Wheelhouse Liner Retainer (2) - Remove
- Front Wheelhouse Liner (3) - Reposition
- Place a drain pan under the vehicle.
Disconnect the electrical connector.
- Using 2 flat-bladed tools, place the blades under each side of the windshield washer solvent container level sensor (1).
- Twist the 2 flat-bladed tools in opposite directions to lift and disengage the windshield washer solvent container level sensor (1) from the windshield washer solvent container level sensor grommet (2).
- Carefully squeeze the windshield washer solvent container level sensor grommet (2) while using a flat-bladed tool to pry outward under the edge of the grommet.