LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Rear Camber Adjustment >> Installation Procedure

Installation Procedure

    Fig 1: View Of Control Arm & Stabilizer Shaft Link
    GM922511Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution
  1. Using a back-up wrench to prevent the link stud from rotating, install the stabilizer shaft links and link nuts and tighten to 60 N.m (44 lb ft) + 30°.
  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals