LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> DTS 4.6 9 >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Steering Rack
    GM293350Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering gear heat shield.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the power steering gear heat shield mounting bolts.

    Tighten:  Tighten the power steering gear heat shield mounting bolts to 9 N.m (79 lb in).

  3. Install the electrical harness clip to the power steering gear heat shield.
  4. Rotate the stabilizer shaft into position.
  5. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement (FE1 and FE3) or Stabilizer Shaft Link Replacement (FE7) .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals