Rear Toe Adjustment

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the adjustment link jam nuts (1).

Fig 1: Identifying Link Jam Nuts & Turnbuckle
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.
In order to adjust the toe, rotate the turnbuckle (2).

NOTE: Refer to Fastener Notice .

Hold the turnbuckle (2) when tightening the jam nuts (1).
Tighten: Tighten the jam nuts to 75 N.m (55 lb ft).
Recheck the toe setting after tightening.
Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications .