LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH2 (LHD))  or Battery Negative Cable Replacement (LH2 (RHD))  or Battery Negative Cable Replacement (LY7 (LHD))  or Battery Negative Cable Replacement (LY7 (RHD)) .
  2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  3. Squeeze the negative battery cable branches together.
    4. IMPORTANT: Note the position of the battery current sensor prior to removal.
  4. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About LEMON Manuals