LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Windshield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Upper Sheet Metal Window Slots
    GM767126Courtesy of GENERAL MOTORS CORP.
  1. Position the locator pins on the window into the upper sheet metal slots in order to hold the stationary window in place in a cross-car position.
    2. Fig 2: Installing Windshield
    GM768359Courtesy of GENERAL MOTORS CORP.
  2. Install the stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
    3. Fig 3: View Of Windshield Side Reveal Molding
    GM1276431Courtesy of GENERAL MOTORS CORP.
  3. Install the windshield side reveal moldings. Refer to Windshield Side Reveal Molding Replacement .
  4. Install the rearview mirror. Refer to Rearview Mirror Replacement (DD7, DD8) or Rearview Mirror Replacement (UE1) .
  5. Install the interior windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
  6. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  7. Install the windshield wipers arms. Refer to Wiper Arm Replacement .
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  9. Close the hood.
scientia non olet · About LEMON Manuals