LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Back Frame & Lower Seat Assembly
    GM1289064Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back frame to the lower seat assembly.
    2. Fig 2: View Of Seat Hinge Nuts & Bolts
    GM71219Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: Use a treat locking compound on the hinge bolts.
  2. Install the hinge bolts and nuts.

    Tighten:  Tighten the nuts to 24 N.m (18 lb ft).

  3. Connect the wire harness retainers to the seat back.
  4. Install the seat belt buckle pretensioner. Refer to Seat Belt Buckle Pretensioner Replacement in SIR.
  5. Install the hook and loop at the end of the seat cushion cover.
  6. Install the seat back cushion. Refer to Pad Replacement - Driver Seat Back Cushion  or to Pad Replacement - Driver Seat Back Cushion .
  7. Install the seat assembly. Refer to Seat Replacement .
scientia non olet · About LEMON Manuals