LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Air Compressor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.

    Important:  Clean the components and the surrounding area to prevent dirt from entering the air system before disconnecting the air hose from the air compressor.

  2. Disconnect the air tube (1) from the air dryer.
  3. Disconnect the electrical connection (2).
    Fig 1: Removing Procedure Of Air Compressor (1 Of 2)
    G01455603Courtesy of GENERAL MOTORS CORP.
  4. Remove the air inlet and hose (1) from the fuel filler neck bracket.
  5. Loosen the mounting nuts.
  6. Slide the air compressor (2) rearward to clear the frame slots.
  7. Remove the air compressor from the vehicle.
    Fig 2: Removing Procedure Of Air Compressor (2 Of 2)
    G01455604Courtesy of GENERAL MOTORS CORP.