LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Replacement - Front Bucket >> Installation Procedure

Installation Procedure

  1. Position the seat in the vehicle.
  2. Connect the electrical harness, if equipped.
    3. NOTE: Refer to FASTENER NOTICE .
    Fig 1: Front Seat Nut Cover & Seat Retaining Front Nuts - Front Bucket
    GM363709Courtesy of GENERAL MOTORS CORP.
  3. Move the seat to the full forward position in order to install the seat retaining rear bolts (1).

    Tighten:  Tighten the retaining rear bolts to 55 N.m (41 lb ft).

  4. Install the front seat adjuster nut cover (3), if equipped.
  5. Move the seat to the full rearward position and install the seat retaining front nuts (2).

    Tighten:  Tighten the nuts to 55 N.m (41 lb ft).

  6. If equipped with side air bags, enable the SIR system. Refer to ACTIVATING SYSTEM .
scientia non olet · About LEMON Manuals