LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Base >> Repair and Diagnosis >> Transmission >> M/T Clutch System >> Repair Instructions >> Clutch Master Cylinder Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. GM2838103

    Unclip the clutch actuator cylinder front pipe from the 2 retainers (1).

  3. GM2837865

    Remove the clutch actuator cylinder pipe retainer (1).

  4. Remove the 3 BPMV bracket assembly nuts (2) and loosen the BPMV bracket assembly (3) from the vehicle.
  5. GM2838105
    NOTE:

    Before disconnecting the clutch actuator cylinder front pipe, remove the clutch/brake fluid from the reservoir tank.

    Remove the retaining clip (1).

  6. Disconnect the clutch actuator cylinder front pipe (2) from the clutch master cylinder.
  7. Remove the clutch master cylinder reservoir hose (3) from the master cylinder. Refer to Clutch Master Cylinder Reservoir Hose Replacement .
  8. Remove the brake pedal assembly. Refer to Brake, Accelerator, and Clutch Pedal Replacement .
  9. GM2838106
    NOTE:

    Press the 2 latches (arrows) together.

    Disconnect the push rod retainer (1) from the clutch pedal.

  10. GM2838107

    Remove the 2 clutch master cylinder mount fasteners (1).

  11. Remove the clutch master cylinder (2) from the brake pedal assembly.
scientia non olet · About LEMON Manuals