Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Position the front lower control arm ball stud on the front lower control arm.
- Install the front lower control arm ball stud bolts and nuts and tighten the nuts to 68 N.m (50 lb ft).
- Remove the front lower control arm assembly from the vise.
- Install Front Lower Control Arm - Lower Control Arm Replacement
- Measure and adjust the wheel alignment. Wheel Alignment Specifications
CAUTION:
Refer to Fastener Caution .
NOTE:
The front lower control arm ball stud bolts should be installed from the top pointing downwards.