LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Rear Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front & Rear Bushings
    GM1853577Courtesy of GENERAL MOTORS COMPANY
  1. Position the outer and inner portions of the front lower control arm rear bushing so that they are equally in the front lower control arm.
  2. Position the CH-48107  remover/installer on the outer portion of the front lower control arm rear bushing.
  3. Using a vise, compress the outer and inner portions of the front lower control arm rear bushing until they are fully seated.
  4. Remove the front lower control arm from the vise.
  5. Remove the CH-48107  remover/installer.
  6. Install Front Lower Control Arm - Lower Control Arm Replacement 
scientia non olet · About LEMON Manuals