Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Brake Caliper Bracket Bolt | |
|
150 N.m (111 lb ft) |
|
45-60 degrees |
| Rear Brake Caliper Bracket Bolt | |
|
100 N.m (74 lb ft) |
|
60 - 75 degrees |
| Wheel Bearing/Hub Mounting Bolts | |
|
50 N.m (37 lb ft) |
|
30 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve | 17 N.m (13 lb ft) |
| Brake Hose and the Brake Hose-To-Caliper Bolt | 40 N.m (30 lb ft) |
| Brake Pipe Fitting Bolt | 18 N.m (13 lb ft) |
| Front Brake Caliper Guide Pin Bolt | 28 N.m (21 lb ft) |
| Rear Brake Caliper Guide Pin Bolt | 28 N.m (21 lb ft) |
| Vibration Damper | 9 N.m (80 lb in) |
| Vibration Dampener Stud | 28 N.m (21 lb ft) |
| Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |