LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Rear Camber Adjustment >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the strut to the vehicle. Refer to Strut Assembly Replacement in Rear Suspension.

    Tighten:  Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: Identifying Rear Camber Adjustment
    GM156938Courtesy of GENERAL MOTORS CORP.
  3. Adjust the camber (1).

    Tighten:  Tighten the strut-to-knuckle nuts to 120 N.m (89 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals