Power Seat System: Description

All models are equipped with driver's (left) power seat as standard equipment. Passenger's (right) power seat is optional. Left and right power seat system each consist of a seat switch and 3 reversible motors (front vertical, rear vertical and horizontal). Each motor contains an electronic circuit breaker (PTC), which will reset only after voltage has been removed from motor. Power recline is optional and consists of one reversible motor. Power lumbar system consists of a lumbar switch and 2 reversible motors (vertical and horizontal) located in seatback.

Heated seat system consists of a heated seat module, heated seat switch, a heated seat back and a heated seat cushion for each front seat. Rear Integration Module (RIM), Driver Door Module (DDM) and Passenger Door Module (PDM) are also involved in heated seat operation.

Memory seat is optional and only available for driver's seat. On memory seats, power recline is standard along with power lumbar. Memory seat system consists of Memory Seat Module (MSM), 3 seat motors, one recline motor and 2 lumbar motors. Each motor has a position sensor attached. MSM controls movement of each motor. MSM also provides a soft stop for each motor. Motors will stop just before their physical end of travel.