LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> Roadmaster Base >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Solenoid Windings Tests >> Pull-In Windings Test

Pull-In Windings Test

Connect test equipment. See HOLD-IN WINDINGS TEST heading above. See Figure . Ground terminal "M" of solenoid. Adjust voltage to 10 volts and note ammeter reading. See PULL-IN WINDINGS SPECIFICATIONS  table.

NOTE: Current will decrease as windings heat up.
scientia non olet · About LEMON Manuals