Service Function: Transport Mode/Pre-Delivery Check

To be able to hand over a vehicle to the customer in proper working order, it is essential to execute the TRANSPORT MODE/PRE-DELIVERY CHECK  service function.

The following items are worked through during the pre-delivery check:

• Deactivation of transport mode.
• An adaptation process must be activated in order to determine the vehicle-specific mileage/kilometrage per week. Transport and immobilization periods before the vehicle is delivered to the customer therefore have no effect on the customer-specific weekly mileage/kilometrage.

  The weekly mileage/kilometrage is used to control escalation from "green" to "yellow" (approx. 4 weeks before "red") for maintenance scopes with remaining distances. The averaged mileage/kilometrage of the last 6 weeks is taken into account here.

• Coding or blanking out of the legally prescribed intervals for the statutory vehicle inspection and statutory exhaust emissions test.
• Input of the target dates for the statutory vehicle inspection and the statutory exhaust emissions test (automatic or manual).

  Automatic: By input of the date of first registration and of the time interval

  Manual: By direct input of the target date

• Entry of local, service-related phone numbers, depending on vehicle equipment specification (e.g. BMW Group Mobile Service, BMW Hotline, customer's home dealer).

  The country-specific phone numbers are displayed in the BMW diagnosis system as a reference text. The phone numbers can simply be read off during the input prompt.

• Reference to initialization of TeleService, depending on vehicle equipment specification.
• Checking and if necessary setting of the on-board date for the vehicle.
• Entry of the date for first registration of the vehicle.
• Now clear the fault memory.
  NOTE: Reducing input expenditure. 
  Standardized data are stored in the BMW diagnosis system (for repeated use) in the interests of minimizing the time spent on making inputs in the garage/workshop. The standardized data can be changed with the CBS CORRECTION TESTER DATA  service function.