Contoured Surface: Notes

WARNING: This page is about a different car, the 2025 Audi S5 Sportback, 2025 Audi RS 5 Sportback, and 2025 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

The contoured surface is a surface with the dimensional accuracy of the edges and seams to the surface.

It is specified when:

Any surfaces or parts that have been worked on, such as removing dents, welding or spackling, must be dry sanded with minimum P 80 grit sandpaper.
The vehicle paint shop technician must then re-create the respective surface in a maximum of two steps.

For the contoured surface, the body filling materials

For vehicles made of steel

Two-Part Steel Scraper Set :D 787 300 A2

For vehicles made of aluminum

Two-part diamond-shaped scraper Aluminum Powder :D 004 200 A2 and Hardener :D 004 201 A1 .

Must be used.

NOTE:

Leaded soldering tin may not be used since 01/01/2003.

NOTE:

Audi AG has not approved any unleaded soldering tin procedure.