Front Axle:

-- Driver side brake caliper: Remove the cap(s) -1- for the bleed screw(s).

Fig 1: Identifying Bleeder Screw Cap

Courtesy of AUDI OF AMERICA, LLC

-- Install the container bleed hose -1- on the bleed screw from the inside of the rim.

Fig 2: Identifying Collector Bottle Bleeder Hose

Courtesy of AUDI OF AMERICA, LLC

-- Open the bleed screw and let the brake fluid flow out. The amount of extracted fluid can be found in the table. Refer to TESTING VALUES AND PROCESS SPECIFICATIONS TABLE (BRAKE FLUID, CHANGING): .

-- Close The Bleeder Screw.

-- If there are two bleed screws per brake caliper, repeat the procedure for the second bleed screw.

-- Reattach the cap for the bleed screw(s).

-- Repeat the procedure on the front passenger side.