Control Switch (1970-74)
- Separate regulator and control switch wiring harness at steering column. To test slide switch, connect red wire to test lamp and ground brown wire. With switch in "OFF" position, lamp should not light; with switch in "ON" or "RES" position, test lamp should light. With test lamp connected to red wire and yellow wire grounded, lamp should not light with switch in "OFF" or "ON" position, but should light with switch in "RES" position.
- To check push button continuity, connect lamp between brown and green wires. With button depressed or in normal position, lamp should light. Connect lamp between brown and yellow wires, lamp should light with button depressed; but should not light with button in normal position.