LEMON Manuals: Even more car manuals for everyone
Home >> Alfa Romeo >> 2022 >> Stelvio Ti >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Removal And Installation >> With Display Screen Module >> Removal

With Display Screen Module: Removal

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Display Screen Module (DSM). Refer to MODULE, DISPLAY SCREEN (DSM), REMOVAL AND INSTALLATION .
    GC0177186Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Radio Receiver Module (RRM) to instrument panel screws (2).
  4. Carefully remove the RRM (1) while disconnecting all of the wire harness connectors.
scientia non olet · About LEMON Manuals