LEMON Manuals: Even more car manuals for everyone
Home >> Alfa Romeo >> 2022 >> Stelvio Ti >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Global Telematics Box >> Removal And Installation >> Global Telematics Box Module >> Installation

Global Telematics Box Module: Installation

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the TBM2 to the TBM2 mounting bracket.
  2. Install the screws for the TBM2. Tighten the screws securely.
  3. Connect the instrument panel wire harness connector, the USB connector and the antenna connectors.
  4. Install the ICS. Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals