Dust and Pollen Filter Replacement

Open the glove box. Remove the glove box separator (A) by carefully pulling it straight back.

Fig 1: Identifying Glove Box Separator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the dust and pollen filter assembly (A) from the blower unit.

Fig 2: Identifying Dust And Pollen Filter Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the filter (A) from the housing (B), and replace the filter.

Fig 3: Identifying Filter And Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the blower unit.