LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Clutch System) >> Slave Cylinder Replacement >> O-ring Replacement

O-ring Replacement

WARNING: This page is about a different car, the 2011 Acura TL and 2010 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the slave cylinder.
  2. Remove the roll pins (A), then remove the clutch line connector (B) and the O-ring (C) from the slave cylinder (D).
    Fig 1: Removing Roll Pins
    G06679779Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the clutch line connector (A) with a new O-ring (B), then set in new roll pins (C) to the slave cylinder (D).
    Fig 2: Setting Roll Pins To Slave Cylinder
    G06679780Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the slave cylinder.
scientia non olet · About LEMON Manuals