LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Lubrication) >> Oil Pressure Switch Replacement

Oil Pressure Switch Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
    Fig 1: Oil Pressure Switch With Torque Specifications
    G05457805Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove any old liquid gasket from the switch and switch mounting hole.
  3. Apply a very small amount of liquid gasket to the new oil pressure switch threads, then install the new oil pressure switch.
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.
  4. Connect the oil pressure switch connector.
scientia non olet · About LEMON Manuals