Fuel Tank Replacement: Installation

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Install the tank straps (A), and tighten the bolts (B).

Fig 1: Tank Straps And Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Place a jack or support under the rear suspension subframe. Install the rear suspension subframe with new mounting bolts, aligning the pins (A) with the holes in the subframe.

Fig 2: Identifying Rear Suspension Subframe With Mounting Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.
After installation, do a wheel alignment (see WHEEL ALIGNMENT ).