LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Fuel Supply System) >> Fuel Pressure Regulator Replacement

Fuel Pressure Regulator Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL AND INSTALLATION  ).
  2. Disconnect the fuel gauge sending unit connector (A).
    Fig 1: Identifying Fuel Gauge Sending Unit Connector And Cover
    G05458313Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the cover (B).
  4. Remove the clip (A).
    Fig 2: Identifying Fuel Pressure Regulator And Clip
    G05458314Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the fuel pressure regulator (B).
  6. Install the parts in the reverse order of removal with new O-rings (C) lubricated with clean engine oil.

    Make sure the regulator is installed with the drain hole (D) facing down.

scientia non olet · About LEMON Manuals