Operational Check
NOTE:
The helical type limited slip differential (LSD) distributes optimum power between the two driving axles according to the difference in torque as demanded by the driving wheels. Under no circumstances should the engine be started with either wheel raised off the ground, such as when adjusting wheel balance or when transporting the vehicle in the event of an accident.
- Set the parking brake, and block the rear wheels.
- Raise the front of the vehicle, and support it with safety stands in the proper locations (see SAFETY STANDS ).
- With the ignition switch turned OFF, shift the transmission into 1st gear.
- Rotate either front wheel by hand, and check that the other wheel rotates in the opposite direction.
- If the opposite front wheel does not rotate, or if you cannot spin the front wheels at all, the limited slip differential is faulty and should be replaced.