LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2004 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Wiper System & Washer System) >> Wiper/Washer Switch Replacement

Wiper/Washer Switch Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The wiper/washer switch is built into the combination switch control unit. For the wiper/washer test, refer to the COMBINATION SWITCH CONTROL UNIT INPUT TEST  (see ).
  1. Remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the steering column covers (see COLUMN COVER REMOVAL/INSTALLATION ).
  3. Disconnect the combination light switch 20P connector (A), and dashboard wire harness 8P connector (B) from the wiper/washer switch (C).
    Fig 1: Identifying Combination Light Switch 20P Connector And Screws
    G05488079Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws, then slide out the wiper/washer switch.
scientia non olet · About LEMON Manuals