Door Lock Switch
WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove appropriate door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Remove door lock switch. Disconnect door lock switch 3-pin connector. Check for continuity between terminals No. 1 (Black/White wire) and No. 2 (Black wire) on driver's door, and terminals No. 1 (Black/Orange wire) and No. 2 (Black wire) on front passenger's door. Continuity should exist in lock position only.
- Check continuity between terminals No. 2 (Black wire) and No. 3 (Green/Red wire) on driver's door, and terminals No. 2 (Black wire) and No. 3 (Blue/Orange wire) on front passenger's door. Continuity should exist in unlock position only. In off position, no continuity should exist between any terminals. If continuity is not as specified, replace door lock switch.