LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> 3.5RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - M5DA >> Component Testing >> Shift Lock Solenoid

Shift Lock Solenoid

  1. Remove center console. Disconnect electrical connector from main wiring harness and note wire colors. See Fig 1 .
    CAUTION: Battery voltage must be applied to correct shift lock solenoid terminals or diode inside shift lock solenoid will be damaged.
  2. Momentarily connect positive battery voltage to Black/Yellow wire terminal and negative battery terminal to Green wire terminal. Note that shift lock solenoid operates with battery voltage applied. Replace shift lock solenoid if solenoid does not operate.
Fig 1: Identifying Shift Lock Solenoid Connector Terminals
G93B23961Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals